Tooth Jewellery Bonding Procedure:

💎 Firstly, the tooth is cleaned with a fluoride free polishing paste, dried and isolated.

💎 To increase the surface area for bonding it is etched with an acid etchant for 20 to 30 seconds.

💎 The surface is thoroughly rinsed with water and blow dried. A light-curing bonding agent is applied and left on the tooth for a maximum of 20 seconds.

💎 The tooth is light-cured and a small amount of flow composite is applied to its surface.

💎 Using a jewel handler, the jewel is pressed into the center of the composite.

💎 With the light-curing lamp the composite is cured from all sides.

Features of Tooth Jewellery:

🌟 The procedure is non-invasive and painless.

🌟 It does not require extra maintenance.

🌟 It can be removed or replaced anytime and has no effect on the tooth
enamel once the jewel is removed or replaced.

🌟 It involves a procedure that only takes about 10 – 15 minutes and is completely reversible.

🌟 It is stain resistant.

🌟 It does not obstruct regular brushing habits even if using an electric toothbrush nor
restrict you from visiting your dentist or dental hygienist.

---

~Sunantha ✨